Adapter TP‑NB2‑EEG16 is a passive adapter (switch) for connecting EEG electrodes with individual connectors TouchProof 1.5 mm (DIN 42 802‑ST) to EEG amplifier NB2‑EEG16. The panel for connecting electrodes is connected to the EEG amplifier using a cable with a ST40X‑18S‑CVR(30) connector.
Adapter TP‑NB2‑EEG16 can be used in cases when it is necessary to quickly disconnect or connect patient-mounted electrodes to an EEG amplifier or when it is necessary to increase the distance from the patient to the amplifier.
|Connector 1 type (to cap)||17 TouchProof 1.5 mm (DIN 42 802‑BU)|
|Connector 2 type (to ampifier)||ST40X‑18S‑CVR(30)|
|Maximum number of electrodes to connect||17|
|Electrode positions||FP1, FP2, O1, O2, F3, F4, C3, C4, P3, P4, T7, T8, Fz, Cz, Pz, GND(AFz), AUX|
|Adapter / Extension lenght||The length of the cable from the splitter to the connector for connecting the amplifier 14 ± 0.5 cm The length of the wires from the splitter to the connector for connecting the electrode is 10 ± 0.5 cm|
|Net weight||95 ±5 g|